How to Set Up IPTV on a MAG Box or Formuler
Last updated: October 2026 · Estimated reading time: 4 minutes · By FluxMedia4K Technical Team
To set up IPTV on a MAG or Formuler box, find your device MAC address (starting with 00:1A:79:...) on the bottom sticker, send it to our team to register, and enter our Stalker Portal URL in your device settings. Your portal interface will load automatically after a reboot.
What You Need Before Starting
Infomir MAG (250, 254, 322, 420, 524) or Formuler (Z7+, Z8, Z10, Z11 Pro).
12-digit physical address beginning with 00:1A:79 registered on our server.
The secure portal link provided by FluxMedia4K support.
Step-by-Step Setup Guide (MAG Box)
1Find and Submit Your MAC Address
Turn your MAG box upside down and inspect the barcode sticker. Locate the MAC address (e.g. 00:1A:79:XX:XX:XX). When requesting your trial or ordering a plan, provide this MAC address to our support team so we can whitelist your box on our middleware server.
2Open System Settings on Your MAG
Turn on your television and MAG box. If the portal is loading or shows an error, press the Setup button on your remote. Select System Settings.
3Configure Servers and Portal 1 URL
Navigate to Servers > Portals. In the Portal 1 name field, type "FluxMedia4K". In the Portal 1 URL field, enter the exact Stalker URL provided by our team (e.g. http://portal.fluxmedia4k.com:8080/c/). Leave Portal 2 empty. Press Save / OK.
4Reboot Portal
Press the Back button until you return to the main settings page, select Reload portal, or unplug your MAG power cord for 5 seconds and plug it back in. The box will contact our server, verify your registered MAC address, and display the full Stalker TV portal with your channels and EPG.
Setup on Formuler Boxes (MYTVOnline 2 & 3)
Formuler devices feature the dedicated MYTVOnline application, renowned for its fluid TV guide and channel zapping speed:
- Open MYTVOnline from your Formuler home screen.
- Go to Connections > Add Portal.
- Give the portal a nickname ("FluxMedia4K").
- Enter the Portal URL supplied in your login message.
- Provide your Formuler ID / MAC (found on the screen) to our support team to activate access, then click Connect.
Troubleshooting Common MAG & Formuler Errors
This message means the MAC address registered on our server does not match your device, or your 24-hour trial period has ended. Message our team on WhatsApp with your MAC address to refresh activation.
Check your network connection. In MAG settings, go to Network > Auto (DHCP) to ensure your box is receiving a valid local IP address from your router.
In System Settings > Video, set Graphic Resolution to Same as video or 1080p-60 to avoid HDMI handshaking errors with 4K televisions.
Frequently Asked Questions
Can I change my registered MAG MAC address later?
Yes. If you buy a new set-top box or replace your hardware, simply message our support team on WhatsApp and we will transfer your subscription to your new MAC address free of charge.
Does a MAG box work over Wi-Fi?
Some older MAG models (like the MAG 254) require a dedicated USB Wi-Fi dongle. We strongly recommend connecting MAG devices via Ethernet cable for the lowest jitter.
Ready to Test on Your MAG or Formuler?
Start your free 24-hour IPTV trial today with no card needed. Message us your MAC address for instant portal activation.